The Canfield Custom Pumps Turbi-Float ® Floating Pump System ships with the following standard equipment and parts:
- Turbi-Float ® Pump with 3 phase, 230 / 460 v. Electric Motor
- Pontoon system with pivoting framework and mounting hardware
- Intake Strainer ½” perforated galvanized steel
- Quick connect camlock or circlelock coupling set with hose shank
- (1) hose male end, weld-on type (for shoreline connection)
- (4) Stainless steel t-bolt hose clamps
- Tube of #2 Lightweight Lithium Grease
- Tube of high temperature Electric Motor Grease
- Owner’s Manual
Not Included with the standard Turbi-Float ® Floating Pump System but available at additional cost:
- Wheel/Winch Kit
- “Lay Flat” type hoseType “SO” power cable
- Low Level Shut Off Switch
- Self-Cleaning Intake Screen
- Electric Motor 1 phase, 230v. 5hp, 7.5hp and 10hp
|
 |
