Canfield Custom Pumps

Group Four

Model		HP	RPM			Head / Capacity					List Price
7TLC-1-10		10**	3500	Total Head (ft.)	-	48	54	60	65	70	$9295
				Gallons Per Minute		625	575	525	475	425
7CHC-1-15		15	3500	Total Head (ft.)	-	82	89	95	100	103	$9495
				Gallons Per Minute		275	250	225	200	175
8H38-1-15		15	3500	Total Head (ft.)	-	65	75	85	92	100	$9395
				Gallons Per Minute		800	700	600	500	400
8H48-1-20		25	3500	Total Head (ft.)	-	75	80	88	90		$9695
				Gallons Per Minute		900	800	700	600
10KKL-1-25		25	3500	Total Head (ft.)	-	90	95	105	110		$11995
				Gallons Per Minute		850	800	750	700
11CLC-2-25	XHD	25	1750	Total Head (ft.)	-	89	102	114	124		$12475
		6" Body		Gallons Per Minute		900	800	700	800
12EJH-1-25	XHD	30	1750	Total Head (ft.)	-	82	90	100	112	120	$13095
		8" Body		Gallons Per Minute		1200	1100	1000	900	800
9CLC-1-30		30	3500	Total Head (ft.)	-	100	115	129	140	148	$11495
				Gallons Per Minute		1000	900	800	700	600
12EMM-2-40	XHD	40	1750	Total Head (ft.)	-	120	130	144	152	160	$14195
		8" Body		Gallons Per Minute		1100	1000	900	800	700
9CLC-1-40		40	3500	Total Head (ft.)		115	130	146	158	167	$12695
				Gallons Per Minute		1100	1000	900	800	700

XHD Models are 1750 RPM

* Flow rates: 400 - 1100 G.P.M. Discharge pressure: 48 - 167 feet. See individual model curves for specific performance.

** All Turbi-Float Floating Pump Systems are priced using three phase 230/460 volts electric motors. Single phase electric motors are available from 5hp through 10hp and may be substituted at the additional cost of:

$340 for a single phase 230 volt 5hp motor
$349 for a single phase 230 volt 7.5hp motor
$421 for a single phase 230 volt 10hp motor

Prices subject to change without notice

FOB Ft. Morgan, CO

Price Sect. Doc. #09-2007

The above charts show performance using norminal service factor of the motor in some applications

< Back